RBMS Plus Installation and Opera
RBMS Plus Installation and Operation Manual
Alpha Technologies Ltd. | www.alpha.ca
PAGE 52
0370260-J0 Rev B
Updating Firmware
The RBMS Plus firmware can be updated remotely using TFTP. To perform this update you will need a TFTP Client. A
free TFTP Client can be downloaded from
http://tftpd32.jounin.net/tftpd32_download.html
. Be sure to read and
comply with the licensing agreement. Other free TFTP clients are available on the Internet. This TFTP client is used in
the following example.
Before uploading firmware to a RBMS Plus, close any web
browsers or Telnet clients that are connected to the device.
Run the TFTP client and the window to the left will appear. Press
the settings button and the window below will appear. Ignore the
Base Directory
setting and set all other options exactly as shown.
Then press
OK
.
Select the
Tftp Client
tab and enter the IP address
of the device being updated in the
Host
field. The
Port
field should be set to 69. The
Local File
field
should be set to the firmware or web file to be
downloaded. Unlike previous RBMS Pluss, the files
may be
loaded in any order. Set the remote file name as
shown in
the table below
and the
Block Size
to default.
Press the
Put
button to upload the file to the RBMS Plus. A
progress
bar will appear as the upload starts. The firmware
upload
normally takes about 20 seconds. A window similar
to the one
below will appear when the upload is complete.
Press
OK
and continue with the next file.
