Alpha-InnoTec HM 12Split Скачать руководство пользователя страница 57

Страница: 57 / 84

HM 6Split

HM 12Split

Section 9 |

Control

Mark “search installed slaves" and press the OK but-

ton to automatically find connected slaves for the

master heat pump.

Enter how your system is docked regarding pipes, for

example to pool heating, hot water heating and heat-

ing the building.

This menu has a docking memory which means that

the control system remembers how a particular re-

versing valve is docked and automatically enters the

correct docking the next time you use the same re-

versing valve.

Make different system settings for your installation

here, e.g. activate connected slaves and which ac-

cessories are installed.

If a slave is connected to the master installation, set

it here.

There are two ways of activating connected slaves.

You can either mark the alternative in the list or use

the automatic function "search installed slaves".

Set whether the compressor in the heat pump should

work to a particular curve under specific requirements

or if it should work to predefined curves.

You set a curve for a demand (heat, hot water etc.) by

unticking "auto", turning the control knob until a tem-

perature is marked and pressing OK. You can now set

at what temperatures the max. and min. frequencies,

respectively will occur.

This menu can consist of several windows (one for

each available demand), use the navigation arrows in

the top left corner to change between the windows.

Menu 5.2 - system settings

Menu 5.2.2 - installed slaves

Menu 5.2.3 - docking

Menu 5.1.23 - compressor curve

NOTE

This menu is only displayed if the controller is connect-
ed to a heat pump with inverter controlled compressor.

search installed slaves

This menu contains several sub-menus, one for each

standard.

Menu 5.1.22 - heat pump testing

NOTE

This menu is intended for testing the controller accord-
ing to different standards. Use of this menu for other
reasons may result in your installation not functioning as
intended.

CAUTION

The compressor curves can only be edited by qualified

personnel.

Factory setting:

Slave:

Here you select for which heat pump the dock-

ing setting is to be made.

Compressor:

Select if the compressor in the heat

pump is blocked, or standard (docked for example

to pool heating, hot water charging and heating the

building).

Marking frame:

Move around the marking frame us-

ing the control knob. Use the OK button to select

what you want to change and to confirm setting in

the options box that appears to the right.

Workspace for docking:

The system docking is drawn

here.

Slave (heat pump)

Workspace for docking

Compressor

Marking frame

CAUTION

Changing the factory range will result in incorrect op-

eration of the device.

Symbol

Description

Compressor (blocked)

Compressor (standard)

Reversing valves for hot water, cooling re-

spectively pool control.

The designations above the reversing valve

indicate where it is electrically connected

(EB101 = Slave 1, CL11 = Pool 1 etc.).

Hot water charging

Содержание HM 12Split





















































































Результаты поиска

Содержание HM 12Split

Отзывы:

Похожие инструкции для HM 12Split

Бренды по названию

Популярные бренды

Alpha-InnoTec HM 12Split, Инструкция по установке и эксплуатации

Результаты поиска

Содержание HM 12Split

Отзывы:

Похожие инструкции для HM 12Split

Бренды по названию

Популярные бренды