Alltech 30L100, Руководство оператора

Страница: 12 / 77

KEENAN MechFiber300 Operator’s Manual
12
Revision F01 06
th
March 2020
Figure 3a: Body blade and blade cover
9. When entering the base of the body, it is recommended to cover the body blades in
the vicinity of where work is to be carried out.
10. When removing trapped objects, be aware that some machine components may
move unexpectedly when cleared.
11. Take extreme care when moving around inside the body as surfaces may be
slippery.
SODAGRAIN:
Additional safety instructions and warnings are available and covered in a soda
grain leaflet which should be read carefully before soda treating grain. When finished treating
grain, clean out any remaining material in the mixing and/or auger chamber by loading in 200
–
300 kg of silage or 50 kg of straw and allow the machine to mix before unloading in the normal
manner.
Note: When mixing soda grain, the maximum gross load that can be mixed in the
KEENAN MechFiber300 is 3,800 kg.
The soda grain process can be completed using a KEENAN mixer but before treatment on
your farm make sure you are adhering to local animal feed legislation and health and safety
guidelines involving the treatment of grain.
WARNING:
Failure to follow the safety guidelines above may lead to accident or injury.
Blade
When entering the mixing
chamber, always fit the safety
beading that is provided for the
top knife.
Figure 3b: Top Knife Protection
Figure 4: Breakaway Safety Brake
When entering the mixing
chamber, always fit the safety
beading that is provided for the
top knife.
Blade
Body blades
Figure 3b: top knife protection