SECTION 2.
ASSEMBLING & DISASSEMBLING,
SYSTEMS DESCRIPTION
TECHNICAL SERVICE MANUAL
SZD-54-2
„Perkoz”
page 2.14
Allstar PZL Glider Sp. z o.o.
Doc No. 542.4.02
Issue II
April 2014
Revision
corrected
2.8. Main wheel mounting and dismounting
Method of main wheel mounting is presented in Fig. 2
‒8.
Operation sequence in main wheel dismounting:
1. Remove bolts (20) connecting swingarm (2) with undercarriage shins (21).
2. Dismount brake shoes (3) without disconnecting the hose (7).
3. Unscrew axle screw (26).
4. Remove wheel axle (5).
Mounting to be accomplished in reverse sequence.
NOTE:
Axle screw (26) should be located on the side of the wheel brake.
Legend to Fig. 2
‒8.
1 - Wheel hub
2 - Swingarm
3 - Brake shoes
4 - Brake disk
5 - Wheel axle
6 - Brake master cylinder
7 - Hydraulic hose 1
8 - Hydraulic hose 2
9 - Brake fluid reservoir
10 - Lever
11 - Brake Bowden
12 - Console
13 - Brake lever on control stick
14 - Mudguard
15 - Fuselage frame
16 - Screw
17 - Screw with nut
18 - Bolt
19 - Pin
20 - Bolt
21 - Lower shin
22 - Upper shin
23 - Shock absorber
24 - Bolt
25 - Bolt
26 - Axle screw
27 - Front main former
28 - Rear lower former