SECTION 13.
SAILPLANE TRANSPORT
AND STORAGE IN A HANGAR
TECHNICAL SERVICE MANUAL
SZD-54-2
„Perkoz”
page 13.2
Allstar PZL Glider Sp. z o.o.
Doc No. 542.4.02
Issue II
April 2014
Revision
corrected
13.2. Storage in a hangar
In case of expected long sailplane out of service, it is recommended to
dismount main units.
If the sailplane is stored in fully assembled state, the ends of wings should be
supported.
Lubricate fittings and metal parts.
Put on individual covers on main units.
Set the fuselage in profiled supports placed in second pilot control stick plane
and at tail boom, whereas wings
– with chord plane in vertical position ‒ should be
supported at leading edges in the mid-span and at spar roots close to root rib.
Reduce air pressure in tires.
13.2.1.
Sailplane lifting and moving
Fig. 13-1. Sailplane lifting and moving
