SZD-54-2
„Perkoz”
TECHNICAL SERVICE MANUAL
SECTION 13.
SAILPLANE TRANSPORT
AND STORAGE IN A HANGAR
Issue II
April 2014
Revision
Allstar PZL Glider Sp. z o.o.
Doc No. 542.4.02
page 13.3
corrected
Two methods of sailplane lifting are permitted:
1. With polyester tape [1] wrapped around tail boom in designated area [4],
hanging on crane or winch, and with nose wheel support [2] placed on a
hydraulic lift.
2. With two profiled supports [3] with minimum width of
2”, supporting wings in
root rib planes, placed on hydraulic lifts.
NOTE:
Sailplane cannot be lifted by horizontal stabilizer and by wings in
different way as Manual provides.
13.2.2.
Sailplane hanging
Sailplane can be stored in a hangar by hanging it under ceiling by two
polyester tapes with minimum width of
2”, wrapped around the fuselage. First tape
should support the fuselage in rear cabin control stick plane, and second one in tail
boom in position indicated in Fig. 13
‒2. To prevent structure damages protect these
sites with soft material, such as felt.
Fig. 13-2. Sailplane hanging areas
