SECTION 16.
PERIODIC MAINTENANCE
TECHNICAL SERVICE MANUAL
SZD-54-2
„Perkoz”
page 16.2
Allstar PZL Glider Sp. z o.o.
Doc No. 542.4.02
Issue II
April 2014
Revision
corrected
16.3. Periodic maintenance of board instruments
Service and periodic maintenance for board instruments produced by PZL
Warszawa II is to be done in accordance with items 16.10.2. and 16.10.3. and
bulletin BE-001/SZD/2011.
Service and periodic maintenance for board instruments from other producers is to
be done in accordance with certificates and instructions from instrument producer.
Compass compensation is to be performed every 24 months. National regulations
may require a different compensation period.
Service and periodic maintenance for additional equipment installed on sailplane
(acc. to item 8.2.) is to be done in accordance with certificates and instructions
from equipment producer.
Service and periodic maintenance for GM510 accelerometer is to be done in
accordance with technical requirements specified in the document No. 542.3.10.01.
Service and periodic works of additional equipment, marked in item 8.2. by
asterisk (*), is to be done according to requirements described in TSM supplement
for this equipment.
Service and periodic maintenance for other additional equipment (acc. to item 8.3.)
is to be done in accordance with requirements provided in supplements to TSM for
this equipment.
16.4. Periodic maintenance of radio and electronic equipment
Service of radio and electronic equipment is to be done in accordance with
instructions prepared by producer of this equipment.
16.5. Periodic maintenance of tow releases
Periodic maintenance of tow releases is to be done in accordance with
instructions prepared by manufacturers of releases.
16.6. Periodic maintenance of wheels
Service of TOST main wheel is to be done in accordance with Installation and
service manual of TOST wheels.
Service of nose and tail wheels performed according to item 16.10.7.16.
