ADSL2/2+ Broadband Router User Guide
Configuration Program
The ADSL2/2+ Broadband Router contains an HTTP server. This enables you to connect to it,
and configure it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
•
Netscape 7.1 or later.
•
Mozilla 1.6 or later
•
Internet Explorer V5.5 or later
Preparation
Before attempting to configure the ADSL2/2+ Broadband Router, please ensure that:
•
Your PC can establish a physical connection to the ADSL2/2+ Broadband Router. The PC
and the ADSL2/2+ Broadband Router must be directly connected (using the Hub ports on
the ADSL2/2+ Broadband Router) or on the same LAN segment.
•
The ADSL2/2+ Broadband Router must be installed and powered ON.
•
If the ADSL2/2+ Broadband Router's default IP Address (192.168.0.1) is already used by
another device, the other device must be turned OFF until the ADSL2/2+ Broadband
Router is allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the ADSL2/2+ Broadband Router:
1. After installing the ADSL2/2+ Broadband Router in your LAN, start your PC. If your PC
is already running, restart it.
2. Start your WEB browser.
3. In
the
Address
box, enter "HTTP://" and the IP Address of the ADSL2/2+ Broadband
Router, as in this example, which uses the ADSL2/2+ Broadband Router's default IP
Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
•
User name
admin
•
Password
password
10
