ADSL2/2+ Broadband Router User Guide
Figure 19: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button -
Obtain an IP address from a DHCP Server
or
Specify
an IP Address
, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting.
Using this is recommended
. By default, the ADSL2/2+
Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the ADSL2/2+ Broadband Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The
Default Gateway
must be set to the IP address of the ADSL2/2+ Broadband Router.
To set this:
•
Click the
Advanced
button on the screen above.
•
On the following screen, click the
Add
button in the
Gateways
panel, and enter the
ADSL2/2+ Broadband Router's IP address, as shown in Figure 20 below.
•
If necessary, use the
Up
button to make the ADSL2/2+ Broadband Router the first
entry in the
Gateways
list.
24
