Advanced Features
•
BLOCK by schedule, otherwise Allow
•
ALLOW always
•
ALLOW by schedule, otherwise Block
Note:
•
Any outbound traffic which is not blocked by rules you create will
be allowed by the Default rule.
•
ALLOW rules are only useful if the traffic is already covered by a
BLOCK rule. (That is, you wish to allow a subset of traffic which is
currently blocked by another rule.)
•
To define the Schedule used in these selections, use the "Schedule"
screen.
LAN Users
Select the desired option to determine which PCs are covered by this
rule:
•
Any
- All PCs are covered by this rule.
•
Single PC
- Only the selected PC is covered by this rule.
If selected, you must select the PC.
PC
- If using Single PC above, select the PC or Server on your LAN
which will be covered by this rule.
WAN Users
These settings determine which packets are covered by the rule, based
on their source (WAN) IP address. Select the desired option:
•
Any
- All IP addresses are covered by this rule.
•
Address range
- If this option is selected, you must enter the "Start"
and "Finish" fields.
•
Single address
- Enter the required address in the "Single/Start"
fields.
Log
This determines whether packets covered by this rule are logged. Select
the desired action.
•
Always
- always log traffic considered by this rule, whether it
matches or not. (This is useful when debugging your rules.)
•
Never
- never log traffic considered by this rule, whether it matches
or not.
•
Match
- Log traffic only it matches this rule. (The action is
determined by this rule.)
•
Not Match
- Log traffic which is considered by this rule, but does
not match (The action is NOT determined by this rule.)
49
