Allnet ALL-VPN10 Скачать руководство пользователя страница 29

Страница: 29 / 175

ALL-VPN10

VPN/Firewall WLAN-N WAN Router

Enable Line-Dropped

Scheduling

The WAN disconnection schedule will be activated by checking this option. In

some areas, there is a time limitation for WAN connection service. For example:

the optical fiber service will be disconnected from 0:00 am to 6:00 am. Although

there is a standby system in the device, at the moment of WAN disconnection, all

the external connections that go through this WAN will be disconnected too.

Only after the disconnected lines are reconnected can they go through the

standby system to connect with the Internet. Therefore, to avoid a huge number

of disconnection, users can activate this function to arrange new connections to

be made through another WAN to the Internet. In this way, the effect of any

disconnection can be minimized.

Line-Dropped Period

Input the time rule for disconnection of this WAN service.

Line-Dropped

Scheduling

Input how long the WAN service may be disconnected before the newly added

connections should go through another WAN to connect with the Internet.

Backup Interface

Select another WAN port as link backup when port binding is configured. Users

should select the port that employs the same ISP.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave without

making any change.

PPTP

This option is for the PPTP time counting system. Input the user’s connection name and password issued by ISP,

and use the built-in PPTP software to connect with the Internet.

Содержание ALL-VPN10





































































































































































Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды

Allnet ALL-VPN10, Руководство пользователя

Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды