Allnet ALL-VPN10 Скачать руководство пользователя страница 132

Страница: 132 / 175

ALL-VPN10

VPN/Firewall WLAN-N WAN Router

132



Phase 1/ Phase 2 DH Group:

This option allows users to select Diffie-Hellman groups: Group 1/ Group 2/

Group 5.



Phase 1/ Phase 2 Encryption:

This option allows users to set this VPN tunnel to use any encryption

mode. Note that this parameter must be identical to that of the remote encryption parameter: DES

(64-bit encryption mode), 3DES (128-bit encryption mode), AES (the standard of using security code to

encrypt information). It supports 128-bit, 192-bit, and 256-bit encryption keys.



Phase 1/Phase 2 Authentication:

This authentication option allows users to set this VPN tunnel to use

any authentication mode. Note that this parameter must be identical to that of the remote

authentication mode: “MD5” or “SHA1”.



Phase 1 SA Life Time:

The life time for this exchange code is set to 28800 seconds (or 8hours) by default.

This allows the automatic generation of other exchange password within the valid time of the VPN

connection so as to guarantee security.



Phase2 SA Life Time:

The life time for this exchange code is set to 3600 seconds (or 1hours) by default.

This allows the automatic generation of other exchange password within the valid time of the VPN

connection so as to guarantee security.



Preshared Key

：

For the Auto (IKE) option, enter a password of any digit or characters in the text of

“Pre-shared Key” (the example here is set as test), and the system will automatically translate what

users entered as exchange password and authentication mechanism during the VPN tunnel connection.

This exchange password can be made up of up to 30 characters.

Advanced Setting- for IKE Protocol Only

Содержание ALL-VPN10





































































































































































Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды

Allnet ALL-VPN10, Руководство пользователя

Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды