Allnet ALL-VPN10 Скачать руководство пользователя страница 33

Страница: 33 / 175

ALL-VPN10

VPN/Firewall WLAN-N WAN Router

Enable Line-Dropped

Scheduling

The WAN disconnection schedule will be activated by checking this option.

In some areas, there is a time limitation for WAN connection service. For

example: the optical fiber service will be disconnected from 0:00 am to

6:00 am. Although there is a standby system in the device, at the moment

of WAN disconnection, all the external connections that go through this

WAN will be disconnected too. Only after the disconnected lines are

reconnected can they go through the standby system to connect with the

Internet. Therefore, to avoid a huge number of disconnection, users can

activate this function to arrange new connections to be made through

another WAN to the Internet. In this way, the effect of any disconnection

can be minimized.

Line-Dropped Period

Input the time rule for disconnection of this WAN service.

Line-Dropped

Scheduling

Input how long the WAN service may be disconnected before the newly

added connections should go through another WAN to connect with the

Internet.

Backup Interface

Select another WAN port as link backup when port binding is configured.

Users should select the port that employs the same ISP.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave without

making any changes.

Содержание ALL-VPN10





































































































































































Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды

Allnet ALL-VPN10, Руководство пользователя

Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды