Allnet ALL-VPN10 Скачать руководство пользователя страница 27

Страница: 27 / 175

ALL-VPN10

VPN/Firewall WLAN-N WAN Router

Enable Line-Dropped

Scheduling

The WAN disconnection schedule will be activated by checking this option. In some

areas, there is a time limitation for WAN connection service. For example: the optical

fiber service will be disconnected from 0:00 am to 6:00 am. Although there is a

standby system in the device, at the moment of WAN disconnection, all the external

connections that go through this WAN will be disconnected too. Only after the

disconnected lines are reconnected can they go through the standby system to

connect with the Internet. Therefore, to avoid a huge number of disconnection, users

can activate this function to arrange new connections to be made through another

WAN to the Internet. In this way, the effect of any disconnection can be minimized.

Line-Dropped Period

Input the time rule for disconnection of this WAN service.

Line-Dropped

Scheduling

Input how long the WAN service may be disconnected before the newly added

connections should go through another WAN to connect with the Internet.

Backup Interface

Select another WAN port as link backup when port binding is configured. Users should

select the port that employs the same ISP.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave without

making any changes.

PPPoE

This option is for an ADSL virtual dial-up connection (suitable for ADSL PPPoE). Input the user connection name

and password issued by ISP. Then use the PPP Over-Ethernet software built into the device to connect with the

Internet. If the PC has been installed with the PPPoE dialing software provided by ISP, remove it. This software will no

longer be used for network connection.

Содержание ALL-VPN10





































































































































































Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды

Allnet ALL-VPN10, Руководство пользователя

Результаты поиска

Содержание ALL-VPN10

Отзывы:

Похожие инструкции для ALL-VPN10

Бренды по названию

Популярные бренды