Allnet ALL-VPN10, Руководство пользователя

Страница: 25 / 175

ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved 25
Use the following DNS Server
Addresses
：
Select a user-defined DNS server IP address.
DNS Server ：
Input the DNS IP address set by ISP. At least one IP group should be input. The
maximum acceptable groups is two IP groups.
Enable Line-Dropped Scheduling ：
The WAN disconnection schedule will be activated by checking this option. In
some areas, there is a time limitation for WAN connection service. For
example: the optical fiber service will be disconnected from 0:00 am to 6:00
am. Although there is a standby system in the device, at the moment of WAN
disconnection, all the external connections that go through this WAN will be
disconnected too. Only after the disconnected lines are reconnected can they
go through the standby system to connect with the Internet. Therefore, to
avoid a huge number of disconnection, users can activate this function to
arrange new connections to be made through another WAN to the Internet. In
this way, the effect of any disconnection can be minimized.
Line-Dropped Period ：
Input the time rule for disconnection of this WAN service.
Line-Dropped Scheduling
：
Input how long the WAN service may be disconnected before the newly added
connections should go through another WAN to connect with the Internet.
Backup Interface
：
Select another WAN port as link backup when port binding is configured. Users
should select the port that employs the same ISP.
After the changes are completed, click “Apply” to save the configuration, or click “Cancel" to leave without
making any changes.