Allmatic INVERTER COMPACT, Инструкция

Страница: 10 / 20

6-1622616 /R0 06/10/2017
10 / 20
To select the menu item, move with P1 and P3 keys, then press P2 to access the menu item.
AutoReclosingTim
OK → →
PhotoAutoReclose
OK → →
Brake
OK → →
To increase or decrease the value, move with P1 and P3, then press P2 to confirm
[OFF]
OK + -
001
OK + -
Wait for saving data set
SAVE
1. Stop the motor and get in safety conditions, The display must not show any indications. Press and keep pressed key P1 for 2 seconds in order to
activate MENU A, The display shows the first entry available
2. To activate the desired menu, press and hold for 2 seconds the appropriate button.
Once accessed the desired menu (A, B, C), you can scroll it with the P1 and P3 buttons, you can access the desired item (enter) with P2 (central
button) and you can confirm the desired parameter (saving).
3. Select the desired menu item (see the following chart) by shortly pressing the P3 button to skip to the next item or the P1 button to return to the
previous one. The display shows the selected menu item.
4. Confirm the selection of the item by pressing the P2 button.
5. Change the parameter status by following the indications on the second line of the display, using the P1 and P3 button. The first line of the display
indicates the current setting for the selected function. The second line shows the possible modification according to the selected parameter (see the
specific paragraphs).
6. Confirm the setting by pressing the P2 button. The display indicates the saving followed by the selected menu item.
7. It is possible to modify further menu items (go back to point 3) or exit the programming menu by selecting EXIT (confirm with P2 button). The exit is
confirmed by the absence of any indication on the display.
AUTOMATIC EXIT FROM MENU: in case of extended inactivity (15 seconds) the menu will be automatically disabled.