Allied Telesis XS910/8, Руководство пользователя

Страница: 43 / 62

Chapter 3: Installation Using the AT - BRKT - J24 Wall Mount Bracket
43
Installing the Switch on a Wall Using the AT - BRKT - J24 Brackets
The switch can be mounted on a wall using the AT - BRKT - J24 wall mount
bracket kit.
What to Prepare
for Wall
Installation
You need the following items to install the switch on a wall:

Four AT - BRKT - J24 brackets

16 M4mm x 6mm screws to attach the brackets to the switch
(included in the AT - BRKT - J24 kit)

Eight 4mm x 32mm wood screws for wall mounting
(not included)

Philiips-head screwdriver

Pencil

Drill
Note
You must provide screws to attach the brackets to the switch, a
cross-head screwdriver, a pencil, and a drill.
Installing the
Switch on a Wall
To install the switch on a wall, perform the following procedure:
1. Review “Reviewing Safety Precautions” on page 26 and “Selecting a
Site and Planning the Installation” on page 29 before performing this
procedure.
2. Place all the items from the packaging on a work table.
3. Attach each bracket to the switch using four screws as shown in Figure
17 on page 44.