Allied Telesis GS950 PS Series, Руководство по установке, Страница: 87 / 108

GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
87
3. Set the subnet mask on your computer to 255.255.255.0.
4. Power on the switch.
5. Start the web browser on your computer.
6. Enter the IP address 192.168.1.1 in the URL field of the browser.
You should see the logon window. Refer to Figure 49 on page 86.
7. Enter “manager” for the user name and “friend” for the password. The
user name and password are case-sensitive.
8. Click the Sign In button.
Starting the First
Management
Session without a
DHCP Server
This procedure explains how to start the first management session when
the GS950/28PS V2 Switch is connected to a network that does not have
a DHCP server. To start the management session, perform the following
procedure:
1. If your network has VLANs, verify that your computer and the GS950/
28PS V2 Switch are connected to ports on an Ethernet switch that are
members of the same VLAN. This might require accessing the switch’s
management software and listing the VLANs and their port
assignments. For example, if the GS950/28PS V2 Switch is connected
to a port that is a member of the Sales VLAN, your computer must be
connected to a port that is also a member of the same VLAN. If your
network is small and does not have VLANs or routers, you may
connect your computer to any port on the Ethernet switch.
2. Change the IP address on your computer to 192.168.1. n , where n is
any number from 2 to 254. Refer to the documentation that
accompanies your computer for instructions on how to set the IP
address.
3. Set the subnet mask on your computer to 255.255.255.0.
4. Power on the GS950/28PS V2 Switch.
5. Start the web browser on your computer.
6. Enter the IP address 192.168.1.1 in the URL field of the browser.
You should see the logon window, shown in Figure 49 on page 86.
7. Enter “manager” for the user name and “friend” for the password. The
user name and password are case-sensitive.
8. Click the Sign In button.