Allied Telesis GS950 PS Series Скачать руководство пользователя страница 41

Страница: 41 / 108

GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide

Warning

Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.



Warning

Class I Equipment. This equipment must be earthed. The power
plug must be connected to a properly wired earth ground socket
outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts.



Note

Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible.



Caution

Air vents must not be blocked and must have free access to the
room ambient air for cooling.



This Warning applies only to the GS950/10PS V2 Switch.

Warning

Operating Temperatures. This product is designed for a maximum
ambient temperature of 40°C.



This Warning applies to all GS950 PS V2 Switches except the
GS950/10PS V2 Switch.

Warning

Operating Temperatures. This product is designed for a maximum
ambient temperature of 45°C.



E52

Note

All Countries: Install product in accordance with local and National
Electrical Codes.



Содержание GS950 PS Series













































































































Результаты поиска

Содержание GS950 PS Series

Отзывы:

Allied Telesis GS950 PS Series, Руководство по установке, Страница: 41 / 108

Результаты поиска

Содержание GS950 PS Series

Отзывы: