manualshive.com logo in svg

Allied Telesis GS950 PS Series, Руководство по установке, Страница: 49 / 108

Поделиться
Скачать
Allied Telesis GS950 PS Series Скачать руководство пользователя страница 49

49

Chapter 3

Installing the Switch on a Table or 
Desktop

This chapter contains the instructions for installing the switch on a table or 
desktop.

Warning

Switches should not be stacked on a table or desktop. They could 
present a physical safety hazard if you need to move or replace 
switches. 

 

E91

Warning

The device is heavy. Use both hands to lift it. You might injure 
yourself or damage the device if you drop it. 

 

E94

Note

Airflow in the switch is from left to right, when facing the front of the 
device.

To install the chassis on a table, perform the following procedure:

1. Review “Reviewing Safety Precautions” on page 40 and “Choosing a 

Site for the Switch” on page 46 to verify that the selected site is 
suitable for the unit.

2. Verify that the table is strong enough to support the weight of the 

switch.

3. Verify that the accessory kit came with all the appropriate items. Refer 

to “Unpacking the Switch” on page 47.

4. Lift the chassis from the shipping box and place it upside down on a 

table.

5. Affix the bumper feet to the four corners on the bottom panel of the 

switch. Refer to Figure 20 on page 50.

Содержание GS950 PS Series













































































































Отзывы:

Нет отзывов