Configuring DHCP Snooping
Page 97
Binding Addresses to the DHCP Snooping Database
The
Binding Database Page
contains parameters for querying and adding IP addresses to the DHCP Snooping
Database.
To bind addresses to the DHCP Snooping database:
1.
Click
DHCP Snooping > Binding Database
. The
Binding Database Page
opens:
Figure 58: Binding Database Page
2.
Define any of the following fields as a query filter:
Query Parameters
•
MAC Address
— Indicates the MAC addresses recorded in the DHCP Database. The Database can be
queried by MAC address.
•
IPv4 Address
— Indicates the IPv4 addresses recorded in the DHCP Database The Database can be
queried by IPv4 address.
•
VLAN
— Indicates the VLANs recorded in the DHCP Database. The Database can be queried by VLAN.
•
Interface
— Contains a list of interface by which the DHCP Database can be queried. The possible field
values are:
–
Unit No.
and
Port
— Queries the VLAN database by a specific stacking member and port number.
–
Trunk
— Queries the VLAN database by trunk number.
•
Type
— Indicates the IP address binding type. The possible field values are:
–
Static
— Indicates the IP address is static.
–
Dynamic
— Indicates the IP address is dynamically defined by the DHCP server.
3.
Click
Query
. The results appear in the Query Results table.
