C613-50066-01 REV A
Command Reference for IE200 Series Industrial Managed PoE+ Switches
1167
AlliedWare Plus™ Operating System - Version 5.4.5I-0.x
AMF C
OMMANDS
ATMF
NETWORK
-
NAME
atmf network-name
Overview
This command applies an AMF network name to a (prospective) AMF node. In
order for an AMF network to be valid, its network-name must be configured on at
least two nodes, one of which must be configured as a master and have an AMF
License applied. These nodes may be connected using either AMF downlinks or
crosslinks.
For more information on configuring an AMF master node, see
atmf master
.
Use the
no
variant of this command to remove the AMF network name.
Syntax
atmf network-name <
name
>
no atmf network-name
Mode
Global Configuration
Usage
This is one of the essential commands when configuring AMF and must be entered
on each node that is to be part of the AMF. This command will not take effect until
the particular node is rebooted.
A switching node (master or member) may be a member of only one AMF network.
CAUTION
:
Ensure that you enter the correct network name. Entering an incorrect name
will cause the AMF network to fragment (at the next reboot).
Example
To set the AMF network name to amf_net use the command:
Node_1(config)#
atmf network-name amf_net
Parameter
Description
<name>
The AMF network name. Up to 15 printable characters
can be entered for the network-name.