Allied Telesis AT-GS950/16PS, Руководство пользователя

Страница: 357 / 386

AT-GS950/16PS Switch Web Interface User’s Guide
357
Ports in Multiple MSTIs
A port can be a member of more than one MSTI at a time if it is a tagged
member of one or more VLANs assigned to different MSTI’s. In this
circumstance, a port might be have to operate in different spanning tree states
simultaneously, depending on the requirements of the MSTIs. For example, a
port that belongs to two different VLANs in two different MSTIs might operate
in the forwarding state in one MSTI and the blocking state in the other.
A port’s MSTI parameter settings are divided into two groups. The first group
is referred to as generic parameters. These are set just once on a port and
apply to all the MSTI’s where the port is a member. One of these parameters
is the external path cost, which sets the operating cost of a port connected to a
device outside its region. A port, even if it belongs to multiple MSTI’s, can
have only one external path cost. Another generic parameter designates a
port as an edge port or a point-to-point port.
The second group of port parameters can be set differently for each MSTI in
which a port is a member. One parameter, the internal path cost, specifies the
operating cost of a port when it is connected to a bridge in the same MSTP
region. The other parameter in this group sets the port priority, which acts as a
tie breaker when two or more ports have equal costs to a regional root bridge.