Allied Telesis AT-GS950/16PS, Руководство пользователя

Страница: 196 / 386

Chapter 16: SNMPv1 and v2c
196
SNMP Community Strings
A community string has attributes for controlling who can use the string
and what the string will allow a network management station to do on the
switch. The AT-S112 Management Software does not provide any default
community strings. You must first define an SNMP User and Group Name
on the SNMP User/Group page and then define a Community Name on
the SNMP Community Table page.
Create SNMP
Community
Strings
To create an SNMPv1 or SNMPv2c community string, do the following:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder , select Community Table .
The Community Table Page is displayed. See Figure 65.
Figure 65. Community Table Page
3. Enter a new Community Name .
A name can be up to 31 characters in length.
4. Enter a User Name(View Policy) that has been previously defined.
Note
This name must match one of the User Names displayed on the
SNMP User/Group page. See “Create User and Group Names” on
page 193. If you enter a user name that has not been pre-defined on
the SNMP User/Group page, the Community entry is displayed, but
the agent/manager communication fails.