Allied Telesis AT-GS950/16PS, Руководство пользователя

Страница: 235 / 386

AT-GS950/16PS Switch Web Interface User’s Guide
235
Port List
The Create Port List page allows you to specify a list of ports that will be
used as part of the policy specification.
You can create, modify or delete a Port List by following the procedures in
the following sections:

“Create Port List,” next

“Modify Port List” on page 236

“Delete Port List” on page 237
Create Port List
To create an Port List, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder , select Port List .
The Create Port List page is displayed in Figure 88.
Figure 88. Create Port List Page
3. Enter a number in the Port List Index field.
The Index must be a unique number within the range of 1 - 65536
4. 35. This field is mandatory.
Note
The Port List Index is a required parameter when you create a
Policy. See “Create Policy” on page 238 for more information.
5. Enter a port or group of ports. The Port List can be specified as a
consecutive list, a non- consecutive list or a combination of the two. At
least one or more ports must be specified.