AT-AR256E v3 4 Ports ADSL2/2+ Router User Manual
49
Changing the Timeout Settings
To change the timeout settings:
1.
Click the
Advanced
menu
2.
Click
System Password
.
3.
Select
Enable Authentication
.
4.
Enter the number of minutes in the
Idle Timeout
text field.
5.
To temporarily implement the settings, click
Apply
.
6.
To make changes permanent, click
Save Settings
.
Firmware Upgrade
When updating the firmware, make sure you are using the correct file. Once the upgrade is complete, the
router will reboot. You will need to log back into the router after the firmware upgrade is completed.
To update the firmware:
1.
Click the
Advanced
menu
then click
Firmware Upgrade
. This opens the
Firmware Upgrade
page.
2.
Click
Browse
then locate the firmware file.
3.
Click
Update Gateway
. The update may take a few minutes. Make sure that the power is not turned
off during the update process.
Restoring the Default Settings
To reset to the default factory settings, press and hold
RESET
for 10 seconds. This can be found at the
router’s back panel. When you reset, all the software updates will be lost.
To access the Web User Interface again, you need to install the router anew.
All manuals and user guides at all-guides.com
