34
AT-AR256E v3 - 4 Ports ADSL2/2+ Router - User Manual
Bridge Filters
The Bridge Filters allows you to enable, add, edit or delete the filter rules. When bridge filtering is enabled,
each frame is examined against every defined filter rule in sequence. When a match is found, the appropriate
filtering action (allow or deny) is performed. Up to 20 filter rules are supported with bridge filtering.
Figure 25: Bridge Filters
To configure Bridge Filters:
1.
Select
Advanced
.
2.
Select
Application > Bridge Filters
. This opens the Bridge Filters page.
3.
Select
Enable Bridge Filters
.
4.
To add a rule, enter the source
MAC address
,
Destination MAC address
and
Protocol
with
desired filtering type, then click
Add
.
You can also edit a rule that you created using the
Edit
checkbox. You can delete using
Delete
.
5.
Click
Apply
to temporarily activate the settings.
6.
To make changes permanent, click
Save Settings
.
All manuals and user guides at all-guides.com
