Allied Telesis AT-ANC10S, Инструкция по установке и эксплуатации, Страница: 71 / 124

AT-ANC10S/2 Adapter Installation and User’s Guide
71
Receive Side
Scaling This parameter allows configuring
network load balancing across
multiple CPUs. The default setting
for this property is Enabled. 1. In Microsoft Windows,
right-click the Network Adapter
in Network Connections and
then click Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Receive Side
Scaling value.
Recv Segment
Coalescing (IPv4) When receiving data, the miniport
driver, NDIS, and TCP/IP must all
look at each segment's header
information separately. When
large amounts of data are being
received, this creates a large
amount of overhead. Receive
segment coalescing (RSC)
reduces this overhead by
coalescing a sequence of received
segments and passing them to the
host TCP/IP stack in one
operation, so that NDIS and
TCP/IP need only look at one
header for the entire sequence. 1. In Microsoft Windows,
right-click the Network Adapter
in Network Connections and
then click Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Recv Segment
Coalescing (IPv4) value.
Recv Segment
Coalescing (IPv6) When receiving data, the miniport
driver, NDIS, and TCP/IP must all
look at each segment's header
information separately. When
large amounts of data are being
received, this creates a large
amount of overhead. Receive
segment coalescing (RSC)
reduces this overhead by
coalescing a sequence of received
segments and passing them to the
host TCP/IP stack in one
operation, so that NDIS and
TCP/IP need only look at one
header for the entire sequence. 1. In Microsoft Windows,
right-click the Network Adapter
in Network Connections and
then click Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Recv Segment
Coalescing (IPv6) value.
Table 8. Advanced Features in Microsoft Windows
Feature Description Configuration Steps