manualshive.com logo in svg

Allied Telesis AT-ANC10S, Инструкция по установке и эксплуатации, Страница: 41 / 124

Поделиться
Скачать
Allied Telesis AT-ANC10S Скачать руководство пользователя страница 41

AT-ANC10S/2 Adapter Installation and User’s Guide

41

Installing Linux Driver Software 

There are two ways to install the Linux driver software — from the Source 
RPM Package or by building the driver from the source TAR file. See the 
following sections: 

“Installing the Source RPM Package” on page 41

“Building the Driver from the Source TAR File” on page 42

Note

If a bnx2x driver is loaded and you update the Linux kernel, you 
must recompile the driver module if it was installed using the source 
RPM or the TAR package.

Installing the

Source RPM

Package

The procedure in this section describes how to install the Source RPM 
Package.

To install the Source RPM Package, do the following:

1. Enter the following command:

rpm -ivh netxtreme2-version.src.rpm

2. Change the directory to the RPM path and build the binary driver for 

your kernel (the RPM path is different for each Linux distribution):

cd /usr/src/

redhat,OpenLinux,turbo,packages,rpm

 ...

rpm -bb SPECS/netxtreme2.spec

or 

rpmbuild -bb SPECS/netxtreme2.spec (for RPM version 
4.x.x)

Note

The error message 

error: cannot create %sourcedir /

usr/src/redhat/SOURCES

 is displayed if the rpm-build package 

is not installed. To resolve the problem, locate the rpm-build 
package on the Linux installation media and install it using the 
following command:

rpm -ivh rpm-build-version.arch.rpm

Then complete the installation of the source RPM.

3. Install the newly built package which includes the driver and man 

page: 

Содержание AT-ANC10S





























































































































Отзывы:

Нет отзывов