Preface
x
Contents
The contents of each chapter are described below.
❑
Chapter 1, “Product Description” introduces an overview of functions
and features.
❑
Chapter 2, “Getting Started” describes how an experienced user can
quickly and easily configure an ATM network.
❑
Chapter 3, “Ethernet Administration” tells you how to use ATI’s
Omega management Ethernet software.
❑
Chapter 4, “ATM Administration” tells you how to configure, monitor
and manage an ATM network.
❑
Chapter 5, “Spanning Tree Protocol” tells you how to configure,
monitor and manage a Spanning Tree Protocol algorithm.
❑
Chapter 6, “Software” describes several methodologies for
subsequent software support.
Document Conventions
The following conventions are used in presenting information in this manual:
Commands, prompts, and information displayed by the computer appear in
Courier typeface, for example:
Current Number of Learned Addresses: 133
Number of Defined Filters: 4
Information
that you enter
appears in Courier bold typeface, for example:
AT-4016TR >
status
Information that you
need to enter with a command
is enclosed in angle
brackets < >. For example, you must enter a port number and an IP address
to execute the
ipaddr <port #> <IP address>
command. Note that the
IP address shown below is for illustration only and not meant to represent
your actual IP address.
AT-4016TR
<ipaddr 6 192.138.217.40>
Field value options appear in bold typeface. For example, an AT-4016TR filter
can be either
Entry
or
Exit
.
NOTE
A note provides additional information about, or possible consequence of, a
specific action you can perform.
