Operations Manual
11
Omega Main Menu
Omega’s
Main
menu enables you to access the submenus that are needed to
configure your Ethernet and ATM network. Use the following information to
access the
Main
menu:
1.
Connect the serial port of your terminal or PC to the RS232 console port
located on the front panel. For a PC connection, use a standard 9-pin serial
cable.
2.
Access your terminal either directly or through the terminal emulator
program in Microsoft Windows.
3.
Press the
<RETURN>
key several times. This will ensure auto configuration
of the appropriate baud rate.
NOTE
You do not need to configure Omega if your default terminal is as follows: Data
bits: 8, Stop bits: 1, Parity: 0, Connector: Com1/Com2 (PC/terminal dependent)
AT-S13
Main Menu
The
Main
menu of an AT-4016TR switch is shown below.
NOTE
The use of the Port, Frame and Error statistics submenus are specifically
associated with Ethernet functionality and discussed in Chapter 3, Ethernet
Administration. Since they are not used to actually configure an ELAN, they
will not be presented here.
