Allied Systems LONG REACH FLN Series, Инструкция по установке, обслуживанию и ремонту

Страница: 13 / 40

45-009 REV. 8/20
13
Figure 3-4
• Do not cross dock boards or dock levelers with the attachment or carriage fully
lowered. Ramming the front or rear of the attachment against a dock board can
cause severe damage.
• Limit lift truck movement to a minimum when high stacking. Limit sideshift movement
to a minimum when high stacking.
• Always be observant when high stacking. Look for poorly stacked loads, overhead
obstacles, broken cartons, or damaged products in the stack.
• Travel slowly around corners. Sound horn on blind corners. Be careful of tail swing
and overhead clearances. Watch in all directions. Avoid sudden stops.
3.14 Operator’s Controls
Some lift trucks are equipped with a single lever to control both hoist and tilt functions,
others have separate levers for each function. Refer to your lift truck manual for more
information.
For clarity, the direction of arm movement is shown on the control handle. To move the
arms in the direction shown, pull the handle towards the operator. To move the arms in
the opposite direction, the push the handle away from the operator. (Figure 3-5)
Clamp
Fork position
Push/pull Rotate Sideshift
Figure 3-5 Operator controls