Allied Systems LONG REACH FLN Series, Инструкция по установке, обслуживанию и ремонту

Страница: 19 / 40

45-009 REV. 8/20
19
Quick Hooks
There are two kinds of quick hook, detent-pin style and push-button style.
Button
Slide Plate
Body
Push button
to lower slide.
Raise slide
to secure
attachment
to truck.
Figure 4-3, Push-button style quick hook
For push button quick hooks, depress the button on the back of the hook and allow the
slide plate to drop.
Removing push button quick hooks is NOT recommended.
Detent pin
Hook
Figure 4-4, Detent pin style quick hook
For detent-pin style quick hooks, just pull the pin and remove it. The hook will come loose.
4.2.1 Installations with Bolt-On Hooks
1. Center the truck behind the attachment and drive toward it with the mast tilted
forward about 4 degrees.
2. Line up the locking lug (if equpped) with the notch closest to the center on the
truck’s carriage.
3. Raise the truck carriage completely to engage the top hooks with the truck carriage.
Tilt carriage back until the unit is against the carriage bottom fork bar (0 degrees).
4. Inspect for proper engagement of the locking lug in the notch that puts the attach-
ment closest to the center of the truck’s carriage.
5. Weld on the (optional) extra locking lug supplied with the attachment, (two pieces
of 1/2” x 1/2” x 2.00” steel, shipped loose) with either E-6011 or E-6013 welding rod,
or equivalent, on each side of the truck carriage.