Maintenance
Maintenance
WARNING
Use the proper chemical agents which avoid calcium
sediments on heating elements and other machine
parts. Discuss the issue with your supplier of wash-
ing products. The manufacturer of the machine is
not responsible for the damage of heating elements
and other machine parts due to calcium sediments.
W904
WARNING
Sharp edges can cause personal injury. Wear safety
glasses and gloves, use proper tools and provide
lighting when handling sheet metal parts.
W366R1
IMPORTANT: Replace all panels that are removed to
perform service and maintenance procedures. Do not
operate the machine with missing guards or with bro-
ken or missing parts. Do not bypass any safety devi-
ces.
Daily
IMPORTANT: Replace all panels that are removed to
perform maintenance procedures. Do not operate the
machine with missing guards or with broken or miss-
ing parts. Do not bypass any safety devices.
WARNING
Do not spray the machine with water. Short circuiting
and serious damage may result.
W782
IMPORTANT: Door lock should be checked daily to en-
sure proper operation. Also check that all safety and
instruction stickers are on the machine. Any missing or
illegible safety instructions stickers should be replaced
immediately.
Beginning of Day
1.
Check door interlock before starting operation:
a. Attempt to start the machine with the door open. The ma-
chine should not start.
b. Close the door without locking it and start the machine.
The machine should not start.
c. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, dis-
connect power and call a service technician.
2.
Check the machine for leaks.
a. Start an unloaded cycle to fill the machine.
b. Verify that door and door gasket do not leak.
c. Verify that the drain valve is operating and that the drain
system is free from obstruction. If water does not leak out
during the first wash segment, the drain valve is closed
and functioning properly.
3.
Inspect water inlet valve hose connections on the back of the
machine for leaks.
4.
Inspect steam hose connections for leaks (if applicable).
5.
On machines equipped with an automatic Chemical Supply
System, check all the hoses and hose connections for leaks or
visible signs of deterioration. Replace immediately if either
are present. Chemical leaks can cause damage to the ma-
chine’s components.
WARNING
To reduce the risk of electrical shock, serious in-
jury or death, disconnect the electrical power to
washer-extractor before examining the wiring.
W636
6.
Verify that insulation is intact on all external wires and that all
connections are secure. If bare wire is evident, call a service
technician.
7.
Ensure all panels and guards are properly installed.
End of Day
1.
Inspect and clean the basket and door gasket of residual deter-
gent and all foreign matter.
2.
Clean the door glass and between the door gasket and the
door with a damp cloth.
3.
Clean supply dispenser lid and general area with mild deter-
gent. Flush the dispenser with clean water.
4.
Clean the machine’s top, front and side panels with all-pur-
pose cleaner. Rinse with clean water and dry.
Maintenance
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
55
Part No. D1634ENR4
Содержание WMA103E ARIES
Страница 2: ......
