ALLIANCE SWT421, Руководство по программированию

Страница: 39 / 75

36198
37
13. Normal Final Spin Time “nFS”
This option allows the user to set the amount of time
for a normal final spin cycle.
How to Program Normal Final Spin Time
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 40.
3. Press the DELICATES (+) pad or the COLD (-)
pad to scroll through the programmable options
until
“nFS”
appears in the VFD. See Figure 41.
4. When
“nFS”
appears in the VFD, press the PERM
PRESS pad. The current number of minutes set for
the Normal Final Spin Time will appear in the
VFD.
5. Press the DELICATES (+) or the COLD (-) keypad
to increase or decrease the current number of
minutes displayed in the VFD to the desired
number of minutes. See Figure 42.
NOTE: The Normal Final Spin Time can be set
from four to nine minutes.
6. Press the PERM PRESS (enter) keypad when the
correct number of minutes appears in the VFD. The
next option,
“PSE”
, will appear in the VFD.
NOTE: To program “PSE” (Permanent Press
Wash Time), see option 14. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand; press the COLD keypad
with the other hand. The control will revert back to
the “Ready” mode. See Figure 2.
Figure 40
Figure 41
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C118IE1A
Figure 42
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A