ALLIANCE SWT421, Руководство по программированию

Страница: 58 / 75

56
36198
28. Set Real Time Clock Days “CdA”
This option allows the user to set the Electronic
Control’s internal clock to the correct day of the week.
How to Program the Clock Days
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 85.
3. Press the DELICATES (+) pad or the COLD (-)
pad to scroll through the programmable options
until
“CdA”
appears in the VFD. See Figure 86.
4. When
“CdA”
appears in the VFD, press the PERM
PRESS pad. The current day of the week will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-) keypad
to increase or decrease the day until correct. See
Figure 87.
NOTE: Sunday is considered day one (001),
Monday is day two (002) and so on.
6. Press the PERM PRESS (enter) keypad when the
correct day appears in the VFD. The next option,
“CdE”
, will appear in the VFD.
NOTE: To program “CdE” (Set Real Time Clock
Date), see option 29. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand; press the COLD keypad
with the other hand. The control will revert back to
the “Ready” mode. See Figure 2.
Figure 85
Figure 86
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C133IE1A
Figure 87
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A