ALLIANCE BTEBCFSP171TW01 BTEBEFSP171TW01, Руководство по устранению неисправностей

Страница: 101 / 117

802748
99
Adjustments
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect all electric power to the machine and accessories before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start machine with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the machine is properly grounded.
• Washer motor not grounded! Disconnect electric power before servicing motor.
W502
WARNING
54. Cleaning Non-Electronic Coin
Drop
a. Disconnect electrical power to machine and
drop.
b. Remove coin drop from machine.
c. If lint is preventing coins from rolling through
coin drop, blow compressed air through coin
entry and along the side of the coin drop.
Refer to
Figure 20 .
d. Insert a coin through the coin drop. If coin
does not roll through drop, continue with the
following.
e. Remove cotter pin from top of drop. Refer to
Figure 20 . Save pin for reinstallation when
cleaning is complete.
f. Move metal clip closer to sensor so that it
comes off frame. Refer to Figure 20 .
g. Remove coin return from coin drop frame.
Refer to Figure 21 .
h. Check coin path in coin drop for lint and
residue. If lint or light residues are present,
use a cotton swab to remove. If heavy residue
is present, it may be necessary to first scrape
off excessive residue and then use a cotton
swab dipped in water or isopropyl alcohol
(rubbing alcohol) to remove remainder of
residue. Refer to
Figure 22 .
Figure 20
DRY3B
Compressed
Air
Cotter
Pin
Metal
Clip
Figure 21
Figure 22
DRY4B
Coin Drop
Frame
Coin
Return
DRY5B
Cotton
Swab