Alliance RV Paradigm, Руководство пользователя

Страница: 74 / 144

68 | P a g e
ELECTRICAL (CONTINUED)
Inverter Overview (Continued)
Key features
Pure sine wave output – The output of the PD1200 Series inverter is a 120 VAC, 60 Hz, pure sine
wave. Unlike a modified sine wave, a pure sine wave is ideally suited to drive all types of loads
including refrigerators, motors, power tools, and common household electronics.
Integrated automatic transfer switch
Built into the PD1200 Series Inverter is an automatic transfer switch that engages whenever
power is detected at the AC input port. In recreational vehicles this is often used to switch over
to shore or generator power when it is available, reserving the battery power for later use. The
transfer switch transition times are fast enough that transitioning from one source to another
will not impede operation for most electrical loads.
Ease of install
Built into the PD1200 Series Inverter is an automatic transfer switch that engages whenever
power is detected at the AC input port. In recreational vehicles this is often used to switch over
to shore or generator power when it is available, reserving the battery power for later use. The
transfer switch transition times are fast enough that transitioning from one source to another
will not impede operation for most electrical loads.
2x peak power rating
When starting inductive loads like compressors (found in common household refrigerators)
there is a large surge in power draw during the initial startup. To supply this initial startup
power the PD1200 Series Inverter has been designed to supply a peak power that is 2X its rated
power.
Automatic restart after DC disconnect
The PD1200 Series Inverter will detect when the battery input connections have been removed.
When the DC disconnect switch is reengaged the inverter will automatically restart. Similar to a
DC disconnect switch, this automatic restart also kicks in when the user replaces the batteries.
To avoid an automatic restart, simply turn off the inverter prior to disconnecting the batteries.
Under/over voltage protection
To protect both the inverter and the battery bank the PD1200 Series Inverter has been
designed with integral under voltage and over voltage protection. These voltage limits are
designed to operate with a Lead Acid battery bank without damaging the batteries. The inverter
may also be used with a 12V lithium ion battery pack (LiFePO4) with a properly configured BMS.
See Specifications on page 16 for voltage limits.
< GO TO TOP >