Alliance RV Paradigm, Руководство пользователя

Страница: 52 / 144

46 | P a g e
SLIDEOUTS (CONTINUED)
Hydraulic Slideout System
Alliance RV utilizes a hydraulic through frame slideout for the main floor slideouts. This system
is a rack and pinion guided and utilizes a hydraulic cylinder to move the room. The cylinder rod
is driven in a forward and backward motion in order to move the slideout room in and out.
We recommend that the moving parts be kept clean. They can be washed with mild soap and
water. No grease or lubrication is necessary. All slideouts are operated at the central monitor
panel shown below. This panel will be found relatively close to the entry door of the RV in a
cabinet designed to house this panel. The location will vary depending on floor plan of your RV.
Operating Your Hydraulic Slideout System
Extending Your Hydraulic Slideout
1. Level the RV.
2. Verify the battery is fully charged.
3. Press and hold the rooms switch in the “OUT” position until room is fully extended
and stops moving.
4. Release the switch, this will lock the room into the “OUT” position ( NOTE: Only hold
switch until the room stops extending).
Retracting Your Hydraulic Slideout
1. Verify the battery is fully charged.
2. Press and hold the rooms switch in the “IN” position until the room is fully retracted
and stops moving.
3. Release the switch, this will lock the room in the “IN” position. ( Note: Only hold the
switch until the room stops retracting).
< GO TO TOP >