Service information
General
WARNING
PROFESSIONAL REPAIRS IN ELECTRO INSTALLA-
TION CAN BE CARRIED OUT ONLY BY SERVICE OR-
GANIZATION WITH PERMISSION GIVEN BY PRO-
DUCER / SUPPLIER.
IN CASE OF ANY MAINTENANCE OR REPAIR DIS-
CONNECT THE MACHINE FROM SOURCE OF ENER-
GY AND WAIT UNTIL THE MACHINE COOLS DOWN.
PLEASE FOLLOW ALL INSTRUCTIONS IN THE MAN-
UALS AND THE LABELS AS WELL AS VALID BASIC
SECURITY LAWS IN ORDER TO PREVENT BURNS
AND SCALDS AND INJURIES CAUSED BY ELEC-
TRICITY, HEATING POWER SUPPLY, MECHANICAL
MOVING PARTS.
C145
Maintenance
Remove dirt from the keyboard by a damp cloth after disconnec-
tion from the power supply.
WARNING
Do not use aggresive soaps, caustic chemicals, gas-
oline or other petrochemical substances which can
damage the keyboard.
C082
Follow the instructions from the installation-maintenance man-
ual.
Information for Service
WARNING
Every circuit board has a sticker placed on the
eprom, which specifies the version and the date of
the software. This data along with the machine serial
no., order code must be given in all correspondence
or inquiries to the manufacturer.
C085
XXX-VVV
XXX = (Software for the FLEX CONTROL dryer computer)
VVV = Version
Programmer Circuit Board
WARNING
Connection to the wrong voltage supply may cause
serious bodily injury as well as damage to the elec-
tronic parts and to the wasching machine itself.
C083
• Voltage : 200-240 Vac, 50/60 Hz
• Power : max 16 VA
• Memory :
• EPROM (contains the software)
• EEPROM (contains the customized programs)
• Outputs : 6 relays
• Serial interface : RS485 (2 wire) networking between dryer
computer and external device (PC Computer)
• Display : LCD display
Instructions for Replacing the
Electronic Board and Keypad
• Switch off the main power supply.
• Open the front plate of the dryer.
• Turn the control board assembly holder to the front.
• Remove the connectors from the control board.
• Remove the combination keyboard - electronic timer by the
rear side of the fascia panel.
• Put the new combination keyboard – electronic timer into the
machine and tighten the screws.
Service information
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
54
Part No. D1621ENR3
Содержание SGHP190E
Страница 2: ......
