Alliance Laundry Systems SGHP190E, Руководство по программированию

Страница: 19 / 57

C:Humidity Control
System : No
• Set the Humidity Control
function Yes if the machine
type is executed with Hu-
midity Control.
• No is the default value.
• Yes : the Humidity Control
function is enabled. No :
the Humidity Control func-
tion is disabled.
• Press the ENTER button to
confirm.
C:Temperature: Cel-
cius
• Press the ARROW UP or
DOWN button to select
Celsius or Fahrenheit, de-
pending if you prefer that
the temperature is dis-
played in degrees Celsius
or degrees Fahrenheit.
• Confirm by pressing the
ENTER button.
C:Lint Warning Limit :
15
• The Lint Filter must be
cleaned every day. De-
pending the kind of Fabrics
there will be more or less
lint.
• As memory support, a
warning will be displayed
at the end of the drying cy-
cle if the machine exceeds
the programmed number of
cycles.
• The default value is 15.
• A value between 5 and 20
can be programmed.
• Depending the amount of
lint, you can reduce or in-
crease the number of cy-
cles for which the Alarm
must occur.
• Confirm by pressing the
ENTER button.
NOTE:
By opening the lint door
the „Lint Door Cycle
Counter“ will be reset.
By opening the dryer
door the Warning will be
erased from the display
but will not reset the Lint
Door Cycle Counter.
If the „Lint Door Cycle
Counter“ has not been
reset for 40 cycles, an
Error message will be
displayed and the ma-
chine can’t be started
anymore until the error
message is reset by the
programming switch.
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
19 Part No. D1621ENR3