Alliance Laundry Systems SGHP190E, Руководство по программированию

Страница: 23 / 57

Programming
General
Specific functions have been implemented in the FLEX CON-
TROL dryer computer to allow a detailed programming.
Functions for the complete program.
• Program Number : Selecting the dryer Program
• Program Name : Creating the Program Name
• View : Inspecting the Program settings without making
changes
• Edit : Adjusting a Program
• Copy : Making a Copy of an existing Program
• Exit : Leave the Program Menu
Functions for the program steps.
• Step Number : Selecting the Program Step
• Edit : Adjusting the Program Step
• Add : Adding a Program Step at the end of the program
• Insert : Inserting a Program step in between other Program
Steps
• View : Inspecting the Step settings without making changes
• Delete : Deleting a Step
• Exit : Leave the Program Step Menu
Follow the flowchart step by step.
Step 1: Program Menu
HOW TO GET INTO THE PROGRAM MENU
The initialization menu can only be accessed when the machine is
in standby (the machine is powered up but no program is started).
• SELECT Process_ _ is displayed.
• Switch the programming switch to Program Mode.
• The Main menu is now available.
• Press the ARROW RIGHT button to select the Program
Menu.
Main Menu PROGRAM
• Press the ENTER button to confirm your selection.
• Goto
Step 2: Program Functions »
Step 2: Program Functions
SELECT THE PROGRAM NUMBER
P:Give Program Num-
ber : _ _
• Select the desired program
number by pressing the
ARROW UP or DOWN
button.
• Program 1 to 20 can be se-
lected.
• Press the ENTER button as
a confirmation.
VIEW A PROGRAM
P: Program N°XX
View
• In Program View you can
look to the Program Set-
tings, without making
changes.
• Press the ARROW RIGHT
button if you don‘t want to
see the program Over-
View.
• Press the ENTER button if
you want to see the pro-
gram Over-View.
NOTE: In the program
Over-View Menu, at the
end of a Dryer Program
Step, Press the ENTER
button to see the next
step. See also
Step 3: Pro-
gram Step Functions »
EDIT A PROGRAM
P: Program N°XX Edit
• Editing a program is
changing the program by
selecting a new element
from a list or by changing
values in an existing pro-
gram. You can also add, or
delete steps in an existing
program.
• Press the ARROW RIGHT
button if you don‘t want to
Edit the program.
• Press the ENTER button if
you want to Edit the pro-
gram. Goto
Step 3: Pro-
gram Step Functions »
Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
23 Part No. D1621ENR3