Alliance Laundry Systems SGHP190E, Руководство по программированию

Страница: 53 / 57

Check final drying temperature
At a normal drying process, the outlet air temperature reaches the
programmed target value when the linen gets dry. For a correct
drying process: when humidity control stops the dryer, the dryer
must have reached, before the end of the drying cycle, the pro-
grammed target temperature value. If this is not the case, proba-
bly there will not have occured sufficient evaporation at the dry-
ing process because of reduced heating power. And the air hu-
midity measurement will not have been accurate to allow optimal
humidity control.
Linen must be sorted
A mixture of linen in the dryer can not result in an equal drying
result. It is a good practice that the same kind of linen is sorted
and dryed together, (Coton, Synthetic). In case of Humidity Con-
trol, a mixture of all kinds of linen will not give a good overall
drying result.
Thin - Thick Fabrics
Thick fabrics, like jeans or trousers, need a long drying time.
Dryer program will stop when fabrics are mostly dry, but inside
pockets will still feel damp. In case of thin fabrics, where the lin-
en is sewed together there may be damp spots. Humidity Control
stops the dryer when the linen is dry, based on the measured air
humidity.
Correct Load in Drum
Some fabrics need more space in dryer than others. It is important
to choose the right size of dryer to obtain a good airflow.
• If there is more linen in the drum, the airflow will be restrict-
ed and the linen will not be dried evenly.
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
53 Part No. D1621ENR3