Operation menu
Start Up
WARNING
BEFORE STARTING UP THE FIRST TIME, BE SURE
THAT THE MACHINE IS WELL INSTALLED. SEE IN-
STALLATION AND MAINTENANCE MANUAL. MAKE
SURE THAT THE CONFIGURATION AND INITIALIZA-
TION MENU HAVE THE RIGHT SETTINGS. SEE
CHAPTER INITIALIZING THE MACHINE.
C129
WARNING
DRY CYCLES CAN ONLY BE STARTED WHEN THE
PROGRAMMING SWITCH IS IN RUN MODE.
C130
Switch On the Power
The display lights up when the power is turned on.
• If the program is ready to be started, Select Process _ _ is dis-
played.
Load the Dryer
Open the door and load laundry into the drum. When the drum is
loaded, close the door.
Start a Dryer Program
» Create a simple program by the special function buttons on the
keypad.
• Press the ARROW UP and DOWN buttons to adjust the cor-
responding values.
» Or Select the program number by the PROGRAM SELECT
button.
• Up to 20 programs can be selected. The first 9 are the stand-
ard Drying programs you can find in this manual.
» Press the „START“ button.
The Active Program
• The cycle time will decrease minute by minute and gives you
an indication how long it will take before the cycle is finish-
ed.
• For each Dryer program Step :
• first you will see the Dryer Sequence
• then you will see the Cooldown Sequence
• A row of bars, shows you if the Sequence has just been start-
ed or if ¼, ½ or ¾ of the Sequence time is over.
PrXX StYY ZZ.Z Min
Dry
PrXX : The selected program number.
StYY : The selected program Step.
ZZ.Zmin or ZZ.Z H : The remaining program time in 1/10 of Mi-
nutes or 1/10 of Hours.
: A row of bars appears as a function of the remaining
sequence time.
Dry : The executed Sequence. (example, Dry)
Advancing a Dryer Program
» Press the ARROW UP button to increase the dry-cooldown se-
quence time.
» Press the ARROW DOWN button to decrease the dry-cool-
down sequence time.
» Press the START button to skip the current step. >> >> is dis-
played instead of the remaining time at the moment that the step
is skipped.
WARNING
Even if the advance function has been switched off
in the initialization menu, the advance function will
work if the programming switch is turned into pro-
gram mode.
C066
Drying Time
Once the program has been started, the remaining dry time is dis-
played in minutes.
Program End
1. The "0" on the display will be erased and the machine is ready
to start a new program.
2. Once the program cycle is finished, UNLOAD is displayed.
3. Open the door and unload the machine.
• The Message UNLOAD will be erased and the machine is
ready to start a new program.
• SELECT PROCESS _ _ is displayed.
Operation menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
28
Part No. D1621ENR3
Содержание SGHP190E
Страница 2: ......
