42
800793
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
26. ELECTRIC DRAIN PUMP
a. While supporting the lower access panel,
remove two screws from bottom edge of lower
access panel. Refer to Figure 9.
b. Gently lower the access panel to disengage
panel locators from bottom edge of front panel.
c. Loosen hose clamps and remove three hoses
connected to electric drain pump (outer-tub-to-
pump hose, vent hose and drain hose). Refer to
Figure 10.
d. Remove three mounting screws holding pump
to base.
Figure 10
FLW1642S
SPRING
CLIPS
(MODEL LTS85A*H)
PUTTY
KNIFE
OUTER-TUB-TO
PUMP HOSE
ELECTRIC
DRAIN PUMP
DRAIN
HOSE
