38
800793
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
f. Seat horizontal and vertical tabs on front plate
of timer completely into slots on control
mounting plate. Refer to Figure 8.
g. Tighten attaching screws between 12 to 18 inch
pounds (1.6 to 2.4 Nm).
IMPORTANT: To avoid timer damage, do not
allow timer to be struck on corners, edges of frame,
or on timer shaft.
Figure 8
TIMER
ATTACHING
SCREWS
W428SE3A
TABS
CONTROL
MOUNTING PLATE
SLOTS
TIMER
