14
800793
Section 3 Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3. WASHER WILL NOT START (Timer)
NOTE: If power is disconnected and reconnected, timer knob must be pulled out to energize washer electrical
system.
Washer Will Not Start.
(No Door Lock Only)
Is There
Power
Connected
to Washer?
YES
NO
H034SE3C
Connect Power and Run Washer.
Has
Timer Knob
Been Pulled
to Start
Wash Cycle?
Is There
Voltage at
"L1" Coming
Into Timer
Assembly?
Is There
Voltage at "MA"
Coming out
of Timer
Assembly?
Is There
Voltage at "TS"
Coming out
of Timer
Assembly?
Did Washer
Start?
NO
NO
NO
NO
NO
NO
(1) "AC"
(2) "AC”
(3) "AC”
NO
NO
Run Cycle.
Change Timer.
Change Timer.
Refer to:
"Washer Will Not Start
(Control Board)"
(Paragraph 4)
Pull Timer Knob
and Run Cycle.
Correct Wiring
Between Door Switch
and "L1" on Timer.
Refer to: "Washer
Will Not Start
(Door Switch)"
(Page 16)
Washer Still Will Not Run
YES
YES
YES
YES
NOTE: Be sure timer
is in a cycle position.
