Alliance Laundry Systems BWNBC2PP112TW01, Программирование

Страница: 9 / 28

Display Identification
Light Emitting Diodes (LEDs)
LIGHT EMITTING DIODES (LEDs) are used to indicate the
chosen cycle and cycle status. See below for information on each
LED.
START LED
The START keypad LED flashes whenever the washer is not in a
cycle, the full vend price has been satisfied, and the washer lid is
closed. When the START keypad is pressed, the cycle will begin
or resume. The START LED will shut off when the START key-
pad is pressed.
WASH LED
WASH LED is lit at the beginning of a wash portion of the cycle
and will remain lit until the wash is complete.
RINSE LED
RINSE LED is lit at the beginning of a rinse portion of the cycle
and will remain lit until the rinse is complete.
SPIN LED
The SPIN LED is lit for all spin cycles.
Four 7-Segment Digits
The 7-SEGMENT DIGITS are used to display the time remain-
ing in a cycle, vend price, error messages and descriptive codes.
During diagnostic testing or manual programming of the control,
these digits will display descriptive codes and values.
When displaying the time remaining, the time value is displayed
on the right side of the display. When displaying the vend price,
the value is displayed on the left side of the display.
Display Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. 202713ENR1