Alliance Laundry Systems BWNBC2PP112TW01, Программирование

Страница: 7 / 28

Preliminary Information
About the Control
MDC on the commercial washer is a programmable control that
lets the owner control machine features by pressing a sequence of
keypads.
MDC allows the owner to program cycle time, set vend prices,
retrieve audit information and run diagnostic tests. Washers ship-
ped from the factory have a programmable default cycle (PERM
PRESS/WARM) built in.
IMPORTANT: In the event of a power failure, the control
will not have to be reprogrammed. It is designed with a
memory system that will remember how it was pro-
grammed (for up to 10 years) until the electrical power
is restored.
IMPORTANT: It is extremely important that the washer
has a positive ground connection and that all mechani-
cal and electrical connections to the control are made
before applying power to or operating the washer.
Glossary of Terms
The following are a few terms and abbreviations to learn. These
are referred to throughout the instructions.
Four-Digit Display – This term refers to the window area of the
control that displays words and values.
LED (Light Emitting Diode) – This term refers to the lights next
to the keypads and status words of the control.
Power Failure Recovery
If power fails during an active cycle, the cycle status is saved in
memory. If the European Community (EC) Power Recovery is
disabled, control will automatically resume the cycle (washer lid
must be closed). If EC Power Recovery is enabled and power is
restored in less than two seconds, the washer will automatically
resume the cycle (washer lid must be closed). If the length of the
power failure is greater than two seconds, the user must press the
START keypad to resume the cycle.
Card Reader Communications (Card
Models Only)
The control will communicate with a third party card reader,
available at extra cost from various card reader manufacturers.
Contact the card reader manufacturer of your choice for availabil-
ity and additional information.
Preliminary Information
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7 Part No. 202713ENR1