background image

Collecting Audit Information

This feature allows the owner to retrieve audit information stored
in the washer by pressing a sequence of pads on the control.

 How to Enter Audit Feature

There are two methods the owner can use to enter the Audit Fea-
ture.

 Entering the Audit Feature by Manual Mode

1.   Control must be in Manual Mode. Refer to 

How to Enter the

Manual Mode

.

2.   Press the PERM PRESS/WARM (

) or the DELICATES/

COLD (

) keypad until 

AUdt

 appears in the Four-Digit Dis-

play.

COM2R_SVG

Figure 23

3.   Press the START (enter) keypad. 

C1

 will appear in the Four-

Digit Display.

NOTE: If the procedure did not work, the control will
return to the Ready Mode.

 Entering the Audit Feature with the Coin Vault

Open

1.   Open coin vault. Make sure service door is closed.
2.   Press the START (enter) keypad.

How to Read Audit Data

1.   Use the PERM PRESS/WARM (

) or the DELICATES/

COLD (

) keypad to scroll through various options until the

desired option is displayed in the Four-Digit Display. Refer to 

Table 2 

for an explanation of the audit options available.

Audit Options List

Four-Digit Display

Description

C1

Total Number of Coins #1

C2

Total Number of Coins #2

CyC

Total Number of Machine
Cycles

SP

Total Number of Start
Pulses

Table 2

2.   Once the desired option appears in the Four-Digit Display,

press the START (enter) keypad once to start the audit count.
At this point, the display will show the four-digit number of
the audit value.

3.   Press the START (enter) keypad again. The control will go to

the next audit option in the Audit Options List.

4.   To select other audit options, repeat steps 1-3.

 How to Exit Audit Feature When Using

Manual Mode

1.   Be sure the control shows an audit option, not a value.
2.   While pressing and holding the NORMAL/HOT keypad with

one hand, press the NORMAL/ WARM keypad with the other
hand. The control will return to the previous mode of opera-
tion.

NOTE: To exit Audit Feature when using Coin Vault
Open method, owner must close coin vault.

Collecting Audit Information

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  22

  Part No. 202713ENR1

Содержание BWNBC2PP112TW01





























Отзывы: